Electric transfer chair CH002A | transit wheelchair electric

The entire system of an electric transfer chair is generally composed of a two-way motor, a transmission device, and a seat adjuster. Most of the motors are permanent magnet motors with small size and high power, which are controlled by switches mounted on the side plate of the left seat or on the armrest of the left door. The switch can make a certain motor move in different directions.
After the switch is turned on, the power of the motor rotates the flexible shaft through the gear and the drive shaft, and then drives the seat adjuster to move. When the adjuster reaches the end of the stroke, the flexible shaft stops rotating. In this case, the motor is still rotating, and its power will be absorbed by the rubber coupling to prevent the motor from being overloaded and damaged if the seat is stuck.
When the control switch is de-energized, the return spring can separate the solenoid valve plunger and the claw joint and return it to the original position. In order to prevent the motor from overloading, most permanent magnet motors are equipped with fuses.

Speed control abilityThe giant wheel cable car is carried on two pedestrian streets.The advantage is expressed in the four-wheel design: two rabbits with partial steering, equipped with brake control, the front wheel diameter is 125mm, and the rear wheel diameter is 200mm, which has a better shockproof effect and reduces the pressure on the patient; independent of the overall frame Structured pedals, stability and user comfort; • Increased ease of carrying, can be stowed in children, and improved performance. On the one hand, safety adjustments can be increased; the handles can be retracted later to reduce the overall size, which is suitable for handling in different environments; the safety factor of the transportation system can be maximized.